Draw and calculate a metric thread (M10×1.5)
A metric (ISO) thread has a 60° thread angle and is defined by two numbers: the major diameter d and the pitch P. M10×1.5, for example, means d = 10 mm and a 1.5 mm pitch. From those two values you can work out the pitch diameter, the minor diameter, the thread depth and the drill size to use before tapping. This guide gives the formulas, a step-by-step M10×1.5 worked example, and how to draw the thread profile to scale in DXCAD2D Online.
Metric thread terms and formulas
The metric thread profile is built from a 60° fundamental triangle. Its height is H = (√3 ⁄ 2) × P = 0.86603 × P. The crest and root are truncated, so the real thread depth is less than H.
| To find | Formula | Approx. |
|---|---|---|
| Triangle height H | H = (√3 ⁄ 2) · P | 0.8660 × P |
| Pitch diameter d₂ | d₂ = d − 0.6495 · P | d − 0.75·H |
| Minor diameter (tap ref) D₁ | D₁ = d − 1.0825 · P | ≈ d − P (tap-drill rule) |
| Bolt minor dia (rounded root) d₃ | d₃ = d − 1.2269 · P | used for strength |
| Thread depth h₃ | h₃ = 0.6134 · P | (17 ⁄ 24) × H |
Worked example: M10×1.5
A standard coarse M10 screw has a 1.5 mm pitch. Substitute d = 10, P = 1.5 into the formulas:
- Triangle height: H = 0.86603 × 1.5 = 1.299 mm
- Pitch diameter: d₂ = 10 − 0.6495 × 1.5 = 10 − 0.974 = 9.026 mm
- Minor diameter (tap ref): D₁ = 10 − 1.0825 × 1.5 = 10 − 1.624 = 8.376 mm
- Bolt minor (rounded root): d₃ = 10 − 1.2269 × 1.5 = 10 − 1.840 = 8.160 mm
- Thread depth: h₃ = 0.6134 × 1.5 = 0.920 mm
- Drill before tapping: 10 − 1.5 = 8.5 mm
Common metric coarse thread table
| Thread | Pitch P | Pitch Ø d₂ | Minor Ø D₁ | Depth h₃ | Tap drill |
|---|---|---|---|---|---|
| M6 | 1.00 | 5.350 | 4.917 | 0.613 | 5.0 |
| M8 | 1.25 | 7.188 | 6.647 | 0.767 | 6.8 |
| M10 | 1.50 | 9.026 | 8.376 | 0.920 | 8.5 |
| M12 | 1.75 | 10.863 | 10.106 | 1.073 | 10.2 |
| M16 | 2.00 | 14.701 | 13.835 | 1.227 | 14.0 |
| M20 | 2.50 | 18.376 | 17.294 | 1.534 | 17.5 |
These are coarse-pitch values. For a fine thread such as M10×1.25, put the smaller pitch into the same formulas and every value scales accordingly.
Try it right now — a free 2D CAD in your browser. Nothing to install, no sign-up.
Open DXCAD2D OnlineDrawing the thread profile in the program
Real drawings rarely draw the helix; they draw one tooth to the calculated proportions and repeat it. Below we draw one pitch of the M10×1.5 thread in section (enlarged 10:1 so it is easy to see).
- Turn on Ortho with F8, type L Enter and draw the crest line (major diameter) horizontally, one pitch long = 15 mm (at 10:1 scale).
- Type O Enter, enter 9.20 (= h₃ × 10) Enter, click the crest line, then click below it to get the root line (minor diameter).
- Type
PLEnter and draw the flanks: click a point on the crest line, run down to the root line at 30° from vertical (half of 60°), then back up to the next crest — forming a V groove. - Type
MIEnter, select the tooth and set the mirror axis through the mid-pitch point for a symmetric next tooth, or useAREnter to repeat several teeth along the thread length. - Type D Enter and dimension from crest to root to confirm the depth is 0.920 mm (0.92×10 = 9.20 at 10:1).
Frequently asked questions
What drill size for M10 before tapping
M10×1.5 (coarse) uses an 8.5 mm drill, from the rule tap-drill = major − pitch = 10 − 1.5. A fine M10×1.25 uses an 8.8 mm drill.
What is the pitch of an M10 thread
Standard coarse M10 has a 1.5 mm pitch; fine versions are 1.25 and 1.0 mm, which must be stated explicitly, e.g. M10×1.25.
What is the metric thread angle
60° (the ISO triangular thread), with a 30° half-angle each side of the axis. Whitworth threads differ — they are 55°.
How do I calculate the thread minor diameter
The tap-reference minor diameter is D₁ = d − 1.0825 × P, so M10×1.5 gives 10 − 1.624 = 8.376 mm. The thread depth per side is h₃ = 0.6134 × P.
Summary
A metric thread is set by two values, the major diameter d and the pitch P; every other dimension follows from the same formulas: pitch Ø = d − 0.6495P, tap-reference minor Ø = d − 1.0825P, depth per side = 0.6134P, and the drill before tapping ≈ d − P. For M10×1.5 that gives a pitch Ø of 9.026, a minor Ø of 8.376, and an 8.5 mm drill. When drawing in the program, lay out one tooth to scale and repeat it with Mirror/Array.