Arc length and chord length — formulas and examples
Arc length and chord length come up constantly when you draw curved work — rolled plate, curved rails, or finding the true length of a curved edge to order cut material. This guide gives all the formulas for arc length, chord, and the sagitta (arc height), plus how to work backwards to the radius from values you measured on the part, with worked examples. Every number here has been checked.
The four basic values
Every formula below starts from the central angle θ. Remember that θ must be in radians when you multiply to get arc length: 180° = π radians (π ≈ 3.14159).
| To find | Formula |
|---|---|
| Arc length L | L = r · θ (θ in radians) = π · r · θ° ÷ 180 |
| Chord c | c = 2 · r · sin(θ ÷ 2) |
| Sagitta h (arc height) | h = r · [1 − cos(θ ÷ 2)] |
| Angle θ from chord and radius | θ = 2 · arcsin[c ÷ (2r)] |
Example 1: radius and angle known — find arc and chord
Given: an arc of radius r = 100 mm, central angle θ = 60°.
Convert the angle to radians first: 60° = 60 × π ÷ 180 = 1.0472 rad.
- Arc length L = 100 × 1.0472 = 104.72 mm
- Chord c = 2 × 100 × sin(30°) = 200 × 0.5 = 100 mm
- Sagitta h = 100 × (1 − cos 30°) = 100 × (1 − 0.8660) = 13.40 mm
Example 2: chord and sagitta known — find the radius
On a real part you can often only measure the chord (end to end) and the sagitta (height at the middle). Those two give the radius directly:
Given: chord c = 600 mm, sagitta h = 50 mm.
r = 600² ÷ (8 × 50) + 50 ÷ 2 = 360000 ÷ 400 + 25 = 900 + 25 = 925 mm
Check: distance from centre to chord = r − h = 925 − 50 = 875 mm, and half the chord = 300 mm. By Pythagoras 875² + 300² = 765625 + 90000 = 855625 = 925² exactly — the radius is correct.
Try it right now — a free 2D CAD in your browser. Nothing to install, no sign-up.
Open DXCAD2D OnlineExample 3: radius and chord known — find the arc
Given: radius r = 250 mm, chord c = 400 mm.
- Half angle: sin(θ ÷ 2) = c ÷ (2r) = 400 ÷ 500 = 0.8 → θ ÷ 2 = arcsin 0.8 = 53.13° → θ = 106.26°
- Convert to radians: 106.26° × π ÷ 180 = 1.8546 rad
- Arc length L = 250 × 1.8546 = 463.6 mm
- Sagitta h = r − r·cos(θ÷2) = 250 − 250 × 0.6 = 100 mm (a clean 150–200–250 triangle)
Measuring and drawing it in the program
DXCAD2D has no automatic arc-length readout, so you compute it, but the program helps you measure and build the geometry.
- Press M (measure) and click the two arc ends to read the chord c, then measure the sagitta from the chord midpoint up to the top of the arc.
- Put the values into r = c² ÷ (8h) + h ÷ 2 to get the radius.
- Press C to draw a circle of that radius at the centre, then use trim to cut away everything but the arc you need.
- Dimension it with D (dim), calling out the radius and chord on the drawing.
Frequently asked questions
How do you calculate arc length
L = r × θ with θ in radians, or L = π × r × θ° ÷ 180 with θ in degrees. For example a 100 mm radius over 60° gives an arc of 104.72 mm.
What is a sagitta
It is the height of an arc, measured from the middle of the chord perpendicular up to the top of the arc. Paired with the chord it gives the radius via r = c² ÷ (8h) + h ÷ 2.
How do I find the radius from a chord and arc height
Use r = (c² ÷ 4 + h²) ÷ (2h). For example a 600 mm chord with a 50 mm height gives a 925 mm radius — handy when you measure a curved part on the bench.
How much longer is an arc than its chord
The arc is always longer, and the difference grows with the central angle. To cut material to a curved edge use the arc length, not the chord distance.
Summary
Curved work rests on three formulas: arc length L = r·θ (θ in radians), chord c = 2r·sin(θ/2), and sagitta h = r[1 − cos(θ/2)]. When all you can measure on the part is the chord and the arc height, recover the radius with r = c² ÷ (8h) + h ÷ 2. Convert degrees to radians before multiplying for arc length, and always use the arc length L when cutting to a curved edge.