Home / Articles / Convert inches to mm and fractional inches
How to calculate · Basics

Convert inches to mm and fractional inches

6 min read · updated 13 Nov 2026

Drawings and parts from overseas are often dimensioned in inches or fractional inches such as 3/8" or 1-1/4", but your calipers and CAD program work in millimetres. The one value you need is 1 inch = 25.4 mm exactly — this is a definition, not a rounded figure. This guide gives a ready-to-use fraction-to-mm table, how to convert back, and real worked examples.

The rule: multiply or divide by 25.4

Every conversion comes from one definition.

Core formula: millimetres = inches × 25.4
inches = millimetres ÷ 25.4

If the value is a fraction, turn it into a decimal first, then multiply by 25.4. For example 3/8 inch = 3 ÷ 8 = 0.375 inch, then 0.375 × 25.4 = 9.525 mm.

0 1 inch 0 25.4 mm
One inch split into 10 parts = 25.4 mm; each part is 1/10 inch = 2.54 mm.

Fractional inch to millimetre table

The common fractions are halvings down to 1/16 inch. These are the exact values (not rounded).

FractionDecimal inchMillimetres
1/16"0.06251.5875
1/8"0.1253.175
3/16"0.18754.7625
1/4"0.256.35
5/16"0.31257.9375
3/8"0.3759.525
7/16"0.437511.1125
1/2"0.512.7
5/8"0.62515.875
3/4"0.7519.05
7/8"0.87522.225
1"1.025.4
Easy anchors: 1/8" = 3.175 mm, 1/4" = 6.35 mm, 1/2" = 12.7 mm, 1" = 25.4 mm. The rest are just sums of these — for example 5/8" = 1/2" + 1/8" = 12.7 + 3.175 = 15.875 mm.

Worked examples

Example 1 — a 1-1/2 inch pipe: 1-1/2 = 1.5 inch → 1.5 × 25.4 = 38.1 mm.

Example 2 — a 3/8 inch thread: 3/8 = 0.375 inch → 0.375 × 25.4 = 9.525 mm.

Example 3 — a standard 4 × 8 ft sheet: 4 ft = 48 inch, 8 ft = 96 inch → 48 × 25.4 = 1219.2 mm and 96 × 25.4 = 2438.4 mm.

Convert millimetres back to a fraction

To return a value to inches, round it to the nearest fraction like this.

  1. Divide the mm value by 25.4 to get decimal inches.
  2. Multiply that decimal by the denominator you want (16 for sixteenths, 32 for thirty-seconds) and round to a whole number.
  3. Write it as a fraction and reduce it.

Example: 10 mm = 10 ÷ 25.4 = 0.3937 inch → 0.3937 × 16 = 6.30, round to 6 → 6/16 = 3/8 inch (which is 9.525 mm, 0.475 mm off the true value). For a closer fit use 32nds: 0.3937 × 32 = 12.6, round to 13 → 13/32 inch (10.319 mm).

Watch out: mm values almost never land on a clean fraction, so rounding always introduces a small error. For precise work keep the drawing in its original units and convert only when measuring or ordering.

Try it right now — a free 2D CAD in your browser. Nothing to install, no sign-up.

Open DXCAD2D Online

Work in mm in the program, then check

DXCAD2D Online works in millimetres. When the source drawing is in inches, convert the value before you type it.

  1. To draw a line 2-1/2 inches long, compute 2.5 × 25.4 = 63.5 mm, press L, click the start point and type the distance 63.5 with a direction.
  2. For a circle 3/4 inch in diameter, compute 0.75 × 25.4 = 19.05 mm, press C, click the centre and type the radius 9.525.
  3. To check what you drew, type ME and press Enter, then click two points to read the distance in mm.

Frequently asked questions

How many mm is 1 inch

1 inch = 25.4 mm exactly, by definition. So 2 inches = 50.8 mm and 12 inches (1 foot) = 304.8 mm.

What is 3/8 inch in mm

3/8 inch = 0.375 × 25.4 = 9.525 mm. For reference, 1/4" = 6.35 mm and 1/2" = 12.7 mm.

What is 10 mm in inches

10 ÷ 25.4 = 0.3937 inch, roughly 3/8 inch (which is actually 9.525 mm). A closer fraction is 13/32 inch.

What is 1/2 inch in mm

1/2 inch = 12.7 mm exactly, because half of 25.4 is 12.7.

How do you convert inches to mm

Multiply the inch value by 25.4. If it is a fraction, divide the top by the bottom first — for example 5/8 = 0.625, then 0.625 × 25.4 = 15.875 mm.

Summary

Inch–mm conversion rests on a single value: 1 inch = 25.4 mm exactly. Multiply by 25.4 to go to mm, divide by 25.4 to go back, and always turn a fraction into a decimal first. Memorise the anchors 1/8" = 3.175, 1/4" = 6.35, 1/2" = 12.7, 1" = 25.4 mm and build the rest by adding. Rounding mm back to a fraction always loses a little, so keep precise work in the drawing's original units.