Home / Articles / Print a PDF drawing to scale (1:1 actual size)
Troubleshooting · Printing

Print a PDF drawing to scale (1:1 actual size)

6 min read · updated 13 Nov 2026

The most common problem when printing a drawing from a PDF is that it comes out the wrong size — you lay it on the part or measure it and it is off. Almost always the cause is a print setting that "shrinks to fit the page". This guide shows how to print at true 1:1, how to check it is right, and what to do when the paper is smaller than the drawing.

The cause: the program shrinks to fit the page

The print dialog in most PDF readers and browsers defaults to "Fit to page" / "Shrink to fit", which automatically scales the drawing to fill whatever paper is loaded. That throws the scale off instantly — a 1:1 drawing on A3 sent to A4 with Fit is shrunk to about 71%, so every dimension prints smaller than real.

The key: 1:1 means 1 mm on paper = 1 mm real. Set the print scale to Actual size / 100% / Custom Scale 100 and always turn off "Fit to page".
Fit to page — shrunk, wrong scale Actual size 100% — true size
Left: Fit to page squeezes the drawing to the paper and breaks the scale. Right: Actual size 100% keeps the true size.

Steps to print at 1:1

  1. Open the PDF and press print (Ctrl+P).
  2. Under size/scaling (Size / Page Scaling / Scale) choose Actual size or Custom Scale = 100%. Do not choose "Fit" or "Shrink oversized pages".
  3. Set the paper size to match the drawing — for an A3 drawing, pick A3 paper. If the printer only has A4, see the next section.
  4. Turn off "Fit to printable area" or "Auto-rotate and center" if they clip the edges.
  5. Print it, then check the scale straight away before you use it.

Verify the scale is correct

Never assume a 1:1 print is right — always check with a ruler.

  1. If the drawing has a scale bar, measure it with a ruler; it must match the printed value — a 100 mm scale bar must measure exactly 100 mm.
  2. If there is no scale bar, find a dimension you know, say 50 mm, and measure that line on the paper.
  3. If it is off, work out the error: if it should be 100 mm but measures 97 mm, the print is at about 97% — still being shrunk — so go back and set Actual size.
Note on drawing scale: if the drawing was drawn at 1:2 (the real part is twice the drawn size), printing the sheet at 1:1 (100%) is still correct, because that scale is already baked into the drawing — its scale bar reads the real size. Just don't let the printer shrink or enlarge it further.

When the paper is smaller than the drawing

If the drawing is A3 at 1:1 but you only have an A4 printer, you cannot fit 1:1 on one sheet. Your options are:

  • Poster / Tile printing: many PDF readers have this mode. It splits the drawing across several A4 sheets at 100%, which you tape together.
  • Print at a shop: send the file to a large-format plotter (A3/A1), stating clearly "print at 100%, do not shrink".
  • Print reduced, but label the scale: if you only need an overview, print to A4, but write the real scale on it and do not use it for measuring.

Try it right now — a free 2D CAD in your browser. Nothing to install, no sign-up.

Open DXCAD2D Online

Draw and check in DXCAD2D before printing

If the source arrived as a PDF and you suspect the scale is off, check the real size in DXCAD2D Online first.

  1. Draw or import the drawing at the size it should be, then measure: type ME, press Enter and click two points to read the real distance in millimetres.
  2. Add dimensions with the D (dim) command so every print carries numeric values the reader can check against.
  3. Draw a short scale bar of known length (for example a 100 mm line with the L command) in a corner, as a scale check after printing.

Frequently asked questions

how to print a PDF at actual size

Set the print scale to Actual size or 100% and turn off "Fit to page", then verify by measuring a scale bar or a known dimension with a ruler.

why does my drawing print the wrong size

Almost always because "Fit to page" or "Shrink to fit" is on, which scales the drawing to the paper. Switch to Actual size / 100% and print again.

can I print an A3 drawing on A4 at 1:1

Not on one sheet, because the paper is smaller. Use Poster/Tile mode to print it across several A4 sheets at 100% and tape them together, or use a large-format printer.

what does 1:1 mean

One unit on paper equals one real unit — a 50 mm line in the drawing must measure 50 mm on the printed sheet.

how do I check the scale after printing

Measure a scale bar or a known dimension with a ruler. If it should be 100 mm but reads 97 mm, you printed at 97% and it is still shrunk — set Actual size.

Summary

Printing a PDF to scale comes down to one rule: set the print scale to Actual size / 100% and always turn off Fit to page. Match the paper to the drawing, then check every print with a ruler against a scale bar or a known dimension. If the paper is smaller than the drawing, use Poster/Tile mode or a large-format printer — and if you must reduce it, label the real scale and don't use that copy for measuring.